Guide to Beer Keg Taps
Whenever family and friends have a party or go out for a picnic, they usually have beer kegs available. Thirsty people need to drink a lot so the keg is really cost effective and could save money. A keg tap is a device that allows you to release the beer into your drinking cup from the keg. It is easy to use a keg tap but you must be careful not to waste beer if you are not sure how to do it correctly. Foam can be released from the keg tap if not done properly, and it can go all over your face or your body. It is not as easy as you see people doing it.
The release of the beer is regulated by the keg tap. This uses a lever and through pulling and pressing it, the beer is released. You can get you beer when the pressure is released and it pushes the beer up to your glass. Technically, a keg tap is a switch that you can turn of or off or you can switch to open or close.
You can minimize the foam created when pouring by placing the beer keg in a steady position for a short while. Foam build up is the result of too much movement when the keg is being transported. When you have placed the keg where you plan to serve beer, let it stay for a while, because this will help to minimize the foam. Remove the cap or seal since it will be harder to tap with it. Since pros know how not to put the beer at risk they don’t remove the cap or seal. Since we are not pros we should play it safe.
Tapping with CO2 is done with portable keg systems. Party pump is when pressure is receive by the keg in a single unit pump and tap combination. IN this type, the keg and the beer keg tap are separated. To release the pressure in the ked, the pump is attached and the faucet is opened. Pumping gives air pressure into the keg, and a push on the lever, which is the tap handle that releases beer.
A pony keg or portable beer keg should be consumed in one day because the beer loses its flavor once the air is mixed with the beer. Traditional keg uses an on and off valve. By using this, you are serving by gravity, and there is no air pressure needed. In this type, you can get your beer by sampling opening or closing the keg when the valve is used.
Another Source: over at this website